STI Exit Stopper

Printer-friendly versionSend to friend
$68.75
SKU: STI-6400
STI-6400 Exit Stopper for single doors image
STI-6402 Exit Stopper for double doors imageSTI-6400 Exit Stopper for single doors imageSTI-6400 Exit Stopper for single doors interior imageSTI-6400 Exit Stopper for single doors stop sign image

The STI Exit Stopper is a practical way to solve the problem of unauthorized exits and entries of fire doors.

The Exit Stopper (STI-6400) alerts you to any unauthorized exits or entries through emergency exit doors and rear doors. The Exit Stopper can be used as an inexpensive security device and helps stop theft. The exit alarm's highly visible, red "stop sign" design helps to discourage misuse of fire and emergency doors.

If the protected door is opened, the electronic Exit Stopper (STI-6400) sounds a piercing horn for 30 seconds, three minutes or continuously (as preset by the user). A key operated override will silence the alarm and allow authorized exits. Another option is annunciator mode, in this mode it announces a doors opening with a set of 10 beeps and then resets.

The Exit Stopper (STI-6400) can be installed on wooden or steel doors, with right, left or top mounting, Or the exit alarm can be mounted on the wall with the matching magnet switch assembly on the door and frame.

The device is completely self contained and signals an unauthorized entry as well as exit. The Exit Stopper comes complete with tamper-proof screws and anchors for mounting, a 9 VDC battery and a keyed locking mechanism for easy deactivation.

Features

  • Low-Cost but highly effective.
  • Highly visible stop sign design is a deterrent itself.
  • Signals unauthorized entry as well as exit.
  • Keyed on/off operation allows authorized exits.
  • Automatically shuts off after three minutes.
  • Protected with tamper resistant screws.
  • Can be installed on top or either side of door.
  • May also be installed on the wall with the switch and magnet remotely installed on the door.
  • Completely self-contained.
  • A version is available for use with double doors.
  • Model available with remote horn
  • May be used as a door annunciation.

Specifications

  • Housing - 1/8 in. Polycarbonate
  • Power Source - 9 VDC Alkaline or 12-24 VDC Wired
  • Warning Horn at 1 foot - 95 dB - low and 105 dB - high
  • Relay Contacts - Form C Dry 0-30 Volts AC/DC, 1 Amp
  • Dimensions - 5.375" x 5.375" x 2" (137mm x 137mm x 51mm)
  • Standby Current - 10 uA
  • Alarm Current - 200 mA
  • Operating Temperature - 32°F to 120°F (0°C to 49°C)
  • Should not be exposed to water.
  • Note: End user must verify the alarm and battery function every six months and replace battery annually or as required.

Includes

  • STI-6402 Exit Stopper
  • Reed Contacts
  • 2 Keys
  • Tamper Wrench
  • Mounting Screws
  • Warning Sticker
  • Keychain

Documentation

Your rating: None Average: 9.2 (5 votes)
Share this
Security Products, Inc., Security Control Equipment & System Monitors, Coarsegold, CA
Follow Security Products Inc. on Twitter
 
SSL Certificate Authority